Products Vicmarc Projects Links Downloads Contact
Lathes   |   Lathe Accessories   |   Chucks   |   Chuck Accessories   |   Jaws   |    Miscellaneous   |    Turning Tools   |    Sanding & Grinding   |  
About Us    |   Event Calendar   |   Photo Gallery
Enquiry   |   Distributors   |   Contact Us   |
VL150 - Lathe Accessories

VL200 - Lathe Accessories

VL240 - Lathe Accessories

VL300 - Lathe Accessories

Balancing System

Camlocks and Toolrests

Collet Set

Deep Hole Drilling Tailstock

Drive Dogs and Live Centres

Face Plates


Hollowing Tool Support System

Outboard Turning Attachment

Oval Turning Device VOD300

VOD Video

Spindle Adaptors

Swingaway Tailstock Support System

Three Point Steadies

Toolrest Collars

Vacuum Chuck, Plate & Rotating Unions

Outboard Turning attachment

Both the Tripod and the Outboard Turning Attachment have a 40mm diameter support post that is locked with indexed locking levers.

These are very rigid outboard tuning attachments and have swan necks to icrease access to the work piece 

The Vicmarc Outboard turning attachments are available to facilitate large diameter turning on VL175 with the head swiveled through 90 degrees and outboard on the VL200 and VL300 series lathes. They can also be fitted to other makes of lathe as long the headstock end of the bench or cabinet is flat.

For your own safety, the maximum recommended weight to be used on the outboard side of the machine is 50kg.

Outboard Turning Tripod
46kg Net Weight
Part No. V01210

Outboard Turning Attachment
33kg Net Weight
Part No. V00861