top of page

The VL300 Short Adjustable Stand Mount EVS (Electronic Variable Speed) lathe has been designed to suit most wood turners. The electronic variable speed drive gives up to 200% torque on low rpm and it comes with a powerful 2.2kw motor. The three-step pulleys provide 3 ratios 1:1 for small to medium size work; 1:1.5 for medium to large work; and 1:3 for large work. The diagram in the above photos shows the maximum spindle RPM at each pulley step.


The cast iron lathe is mounted on a 5mm thick steel plate stand, which has been designed with a 700mm wide footprint for stability and rigidity. The stand also features wood shaving discharge chute and a knee stop bar.


All VL300 lathe models accept an extension bed at either end of the bed.  A 500mm or 1000mm bolt on extension bed is available and multiple extensions can be added on.


Precision machined face on both ends of the bed for bolt on extension bed or swing away tailstock support.

Digital speed readout located below the headstock that displays the actual spindle RPM.


Hindged headstock door for ease of use and an  erganomic Toolrest.


Another great new feature on this lathe is the indexing pin safety switch.  This prevents accidental start up while the indexing pin is engaged.


Also sold separately is a pair of stand shelf brackets.  These brackets can be mounted on the back of the stand and allows for a timber shelf to be screwed on top.

Part No. V01060


This model lathe can also be fitted with a mushroom twist stop bottom and additional limit switches on the headstock and motor doors making it comply to regulations for lathes in schools;  Part No. P01115




  •   VL300S ASM Specifications
    300mm Centre Height
    600mm Swing over bed
    550mm Distance between centres
    1070-1370mm Work Height (Bed Bottom to spindle centre)
    24 Indexing holes
    No. 2 MT Headstock & Tailstock spindle
    Taper Roller  Spindle Bearings
    3 Speeds EVS 10 - 3000rpm
    30mm Toolrest Post Diameter
    15mm Hole Through Headstock Spindle
    10.5mm Hole Through Tailstock Spindle
    75mm Quill Travel
    296kg Net Weight
    1060x720x1280 Length x Width x Height (mm)
bottom of page