top of page

The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks cannot be beaten when is comes to holding power. The totally enclosed back assures consistent, smooth action by preventing dust and debris from getting into the scroll and moving parts of the chuck. 

 

The backing lid is also indexed for those wood turners who do not have an indexing facility on their lathes. The VM120 will hold most work up to 500mm (20") in diameter with standard jaws.

 

Chuck type options are shown below

 

Direct Thread (screws directly to the lathe) See photo 4

Insert Type (an appropriate insert to fit your lathe is required) See photo 5
Inserts available for most threads.  Click here for the list of inserts.

 

VM120 Standard Jaws Chuck

Chuck includes: 1 x Standard Jaws, 1 x 4mm Allen T-Bar Allen Key, 1 x 10mm T-Bar Allen Key, 1 x Woodscrew, 1 x Owner's manual, 1 x 9.5mm Tommy Bar (M45 Only) 

 

VM120 No Jaws Chuck

Chuck includes: 8 x Jaw screws, 1 x 4mm Allen T-Bar Allen Key, 1 x 10mm T-Bar Allen Key, 1 x Woodscrew, 1 x Owner's manual, 1 x 9.5mm Tommy Bar (M45 Only) 

 

Click this link for a demonstration video

VM120 Chuck

Rating is 0.0 out of five stars based on reviews
  • VM120 Standard Jaws Chuck

    Chuck includes: 1 x Standard Jaws, 1 x 4mm Allen T-Bar Allen Key, 1 x 10mm T-Bar Allen Key, 1 x Woodscrew, 1 x Owner's manual, 1 x 9.5mm Tommy Bar (M45 Only)

     

    VM120 No Jaws Chuck

    Chuck includes: 8 x Jaw screws, 1 x 4mm Allen T-Bar Allen Key, 1 x 10mm T-Bar Allen Key, 1 x Woodscrew, 1 x Owner's manual, 1 x 9.5mm Tommy Bar (M45 Only) 

bottom of page